Archive for October, 2014

Modular Design Provides Versatility

October 8, 2014 by Nick

Several months ago, we talked about the modular H-frame press we developed that allows a dial table to index parts through it.  In our ammunition case manufacturing line, we need to perform high tonnage pressing processes on small brass tubes to create a primer pocket and stamp the head and we need to automatically feed the brass tubes through the press.  Because of the need for extreme consistency in each part we knew a C-frame press would not work due to deformities caused by deflection.  Our pocket and head machine is up and running so we thought we would show you our modular H-frame press in action so you can see  just how they work.

Our pocket and head machine uses two linear actuators powered by a servo motor that provide 20 tons of force each.  Setpoint’s modular press frame allows a dial table to index parts through the press giving us the speed and ease of feeding that is typical of a C-frame press, without the deformities caused by deflection under the heavy load required to press and stamp the brass case.  The result is a case line that produces match grade quality brass every time, no more inspecting for quality level.

Our press is not only for ammunition case manufacturing.  Setpoint is able to utilize this press for any manufacturing application that requires quick feeding, high tonnage pressing and precision made parts.

Please share and like our post:
Share or like our post:

Let’s Talk Now 866-532-6856

Or fill out the form below and we will contact you.